02 Logging

Geophysical Survey Logging Guide

In this documentation, we'll walk you through the process of adding operations to the production log for geophysical surveys

Contents:

Chapter 1: Creating a New Operation
Chapter 2: Recording Equipment States
Chapter 3: Generating Vessel Timing from the Operations

Chapter 1: Creating a New Operation

Creating a new operation in the Production Log

To create a new operation and start adding lines to the geophysical survey log, follow these steps:

Navigate to the production area, which is located under the logging main icon.

Make sure that you have selected the correct vessel and log type (geophysical survey log).

Click on the “Click to add entry” button to create a new operation.

Make sure that you have correct configuration for the operation selected and populate the other properties of the operation

Chapter 2: Recording Equipment States

To record weather and equipment states:

Navigate to the “QC Input” tab above the entry area.

Here you can record weather observations and SOL/EOL fixes

All of the equipment types added to the configuration will have a tri-state coloured button here which can be toggled between green (accepted), orange (may require a reshoot) and red (rejected)

These states can be viewed in the “Progress Map” tab as well as in the reports.

Chapter 3: Generating Vessel Timing from the Operations

Generating vessel timing using the production log.

Navigate to a vessel timing and select a day which you have already logged production on.

Select the ‘click to add entry’, and if there is production available, then you will get offered to generate the timing from the production automatically.